The devolo range+ technology optimises the data transmission of the products in your home. Every mains supply is different. Therefore, it is important that the adapters adjust to the conditions at your home.
From our more than ten years‘ experience, we have developed a technology that not only makes additional use of the earth wire for data transmission, but also brings the data signal to the power line in optimal form. The transmission and reception technology have also been improved to make reception technology as efficient as possible.
Yes, devolo products of different speed classes are fully compatible with each other. In a mixed network, each adapter connects to every other adapter at the highest possible speed. It does so independently of the other adapters in the network.
In a network consisting of a 200 Mbps adapter and two 500 Mbps adapters, for example, the 200 Mbps adapter will connect to the 500 Mbps adapters at a speed of 200 Mbps. At the same time, the 500 Mbps adapters connect to each other at the full 500 Mbps.
The only exception here is old devices with a speed of 14 and 85 Mbps. Unfortunately, these are not compatible with current products.
dLAN® works throughout the entire mains supply network of the house or apartment, regardless of whether the building is old or new. Of course, the network has to be on the same wiring, and the wire length must not exceed 300 meters. However, different phases are not a problem. Power meters attenuate the signal strongly, but do not necessarily block it.
The majority of power strips with surge protection available in stores will cause impairment of the devolo network‘s performance and thus can be recommended only to a limited extend. An exception is models designed specifically for operation in combination with devolo adapters.
These are available, for example, from APC in its PL8VT3 and PL5B models.
devolo adapters work independently of operating systems and are compatible with most network devices that transmit data by IP signal. They then act like a long network cable. Only the optional additional software depends on the operating system. We offer devolo software for all current operating systems such as Microsoft Windows ®, Mac OS, Linux, Android and iOS. Details can be found in the description of the respective product.
devolo products are protected from overvoltages and power surges in the mains supply network according to national and EU-wide regulations and standards. Compliance with these regulations is reviewed and confirmed by independent accredited laboratories. devolo products are always safe, i.e. the devices never pose a danger, even in the event of a power surge.
In rare cases, local power surges (e.g. nearby lightning strike) may exceed the defined voltage level. In these cases, the built-in surge protection that is a feature of devolo products is activated to avoid further damage. The device usually becomes inoperable in the process.
Connected devices (via network cable or the integrated power outlet) are not protected by this feature. Here, we recommend connecting a power strip with surge protection to the product‘s power outlet and using our products in power strips designed specially for Powerline communication.
In a few cases, power strips - particularly those with integrated switch and surge protection - can impair performance. To attain optimal connections, we recommend using devolo products with integrated (pass-thru) electrical socket and plugging the power strip into the devolo adapter.
Whether your neighbours receive the data signal of your devolo network depends on your home‘s mains supply network. Power meters and long cables can drastically diminish the signal.
To be on the safe side, we recommend encrypting your network using the encryption button on the adapters or the devolo Cockpit software.
All adapters that are certified to the HomePlug standard are compatible and work together. To connect devolo adapters to HomePlug adapters from different manufacturers to form a common network, assign all of the devices the same password.
Configure the devolo devices as usual:
Start dLAN® Cockpit.
Enter the security IDs of all dLAN® adapters.
Assign the shared network password.
Now, assign the other HomePlug devices the same password as the dLAN® devices according to the manufacturer‘s instructions.
Due to the high-frequency cross talk, the data signals are distributed to all phases automatically. The only requirement for this is that the phases run parallel. This high-frequency cross talk is a type of attenuation and can cause power loss.